Filter
Top Products
30
ENGLISH
Selecting the external component to use
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
• LINE IN: To use the external component other than CD changer
• CHANGER: To use the CD changer
1. To change the source to FM, AM or TAPE, press FM/AM or TAPE 2 3 .
2. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
on the display.
3. Select “LINE IN” with
¢ or 4.
4. Select the desired mode with the control dial.
The external component selecting mode changes as follows:
Note:
For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
LINE IN CHANGER
EN25-31.KS-FX8R[E]f 10/23/00, 11:55 AM30