JVC KS-FX480J CD Player User Manual


 
18
ENGLISH
To set Custom Equalizer Link – C-EQ LINK
A different sound mode (C-EQ) can be stored in
memory for each source so that you can change
the sound modes simply by changing the sources.
When shipped from the factory, this mode is
deactivated.
LINK ON: Different sound modes for different
sources.
LINK OFF: One sound mode for all sources.
To select the level meter – LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
AUDIO 1: Shows the audio level indicator.
AUDIO 2: Alternates between “AUDIO 1”
setting and illumination display.
OFF: Erases the audio level indicator.
To select the dimmer mode – DIMMER
When you turn on the car head lights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
AUTO: Activates Auto Dimmer.
OFF: Cancels Auto Dimmer.
ON: Always dims the display.
Note:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the external component to use
EXT IN
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component
– to use.
When shipped from the factory, CD changer is
selected as the external component.
LINE IN: To use the external component other
than CD changer.
CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
EN16-19.KS-FX480[J]f.pm5 12/1/02, 10:04 AM18