JVC KS-FX473R Cassette Player User Manual


 
17
ENGLISH
3
Adjust the bass or treble level or
turn the loudness function ON/OFF.
See page 16 for details.
4
Repeat steps 2 and 3 to adjust the
other items.
5
Press and hold SOUND until the
sound mode you have selected in
step 1 flashes on the display.
Your adjustment made for the
selected sound mode is stored in
memory.
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 16.
To increase the level.
To decrease the level.
2
Adjust the level.
Note:
Normally, the + and – buttons works as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, POP,
SOFT) to your preference and store your own
adjustments in memory.
There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
See the left column for
details.
2
Select “BAS” (bass), “TRE” (treble)
or “LOUD” (loudness).
EN16-17.KS-FX473[E]f 10/19/01, 8:54 PM17