Filter
Top Products
15
ENGLISH
TAPE OPERATIONS
Listening to a cassette
You can playback type 1 (normal) tapes.
1
Turn on the power.
Note on One-Touch Operation:
If a cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off
the power or ignition key. It may damage the
tape head and the cassette.
2
Insert a cassette into the cassette
compartment.
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing.
(Auto Reverse)
3
Select the tape direction.
Press both buttons at the
same time.
Each time you press both
buttons, the tape direction
changes alternately —
forward ( ) and
reverse ( ).
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
• You cannot change the source if the cassette is
still in the cassette compartment.
To change source, you must eject the cassette
first.
• You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-wind a tape
Press in ¡ or 1.
The tape will be wound in the direction of the
arrows (¡ or 1).
To restart playback, lightly press the other
button which is not pressed in (1 or ¡).
Tape direction
EN15-15.KS-FX473[E]f 10/19/01, 9:24 PM15