Filter
Top Products
10
ENGLISH
Using Standby Reception
Standby Reception allows the unit to switch temporarily to your favorite programme (PTY:
Programme Type) and Traffic Announcement (TA) from the current source — another FM
station and Tape (or CD: for KS-FX453R/KS-FX450R only).
Note:
Standby Reception will not work if you are listening to an AM station.
TA Standby Reception
• When you press TP/RDS (for KS-FX453R/KS-FX450R) or TP (for KS-
F353R/KS-F350R) while listening to an FM station, the TP indicator is lit
during reception of a TP (Traffic Programme) station and the TA standby
mode is engaged.
Note:
When the station being received is not a TP station, the TP indicator flashes. Press
or to engage the TA standby mode. “SEARCH” appears on the display, and
TP station search starts. When a TP station is tuned in, the TP indicator is lit.
• If you are listening to a tape (or CD: for KS-FX453R/KS-FX450R only), and
wish to listen to a TP station, press TP/RDS (for KS-FX453R/KS-FX450R)
or TP (for KS-F353R/KS-F350R) to enter the TA standby mode. (The TP
indicator lights up.)
If a traffic programme starts broadcasting while the TA standby mode is active,
“TRAFFIC” appears and the playback source changes to the FM band. The
volume increases to the preset TA volume level and the traffic programme
can be heard (see page 14).
To deactivate the TA standby mode, press TP/RDS (for KS-FX453R/KS-
FX450R) or TP (for KS-F353R/KS-F350R) again.
PTY Standby Reception
• When you press PTY while listening to an FM station, the PTY indicator is
lit during reception of a PTY station and the PTY standby mode is engaged.
The selected PTY name stored on page 12 flashes for 5 seconds.
Note:
When the station being received is not a PTY station, the PTY indicator flashes.
Press
or to engage the PTY standby mode. “SEARCH” appears on the
display, and PTY station search starts. When a PTY station is tuned in, the PTY
indicator is lit.
• If you are listening to a tape (or CD: for KS-FX453R/KS-FX450R only), and
wish to listen to a selected PTY broadcast, press PTY to enter the PTY
standby mode. (The PTY indicator lights up.)
If the selected PTY programme starts broadcasting while the PTY standby
mode is active, the selected PTY name appears and the playback source
changes to the FM band. The selected PTY programme can then be heard.
To deactivate the PTY standby mode, press PTY again.
PTY
TP
RDS
KS-FX453R
KS-FX450R
KS-F353R
KS-F350R
or
TP
EN08-15.KS-FX453/450/353/350[E] 99.11.9, 3:32 PM10