Filter
Top Products
21
ENGLISH
CLOCK H Hour adjustment
CLOCK M Minute adjustment
SCM LINK Sound control memory
linkage
LEVEL Level display
DIMMER Dimmer
TEL Auto mute for cellular
phone system
B. SKIP Blank skip
LINE IN
* External component
1
3
2
Select.
Back
Advance
Back
Advance
LINK ONLINK OFF
Factory-preset
settings
See
page
Set.
0:00
19
below
LINK ON
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Altenates “AUDIO 1” setting and illumination display.
• OFF: Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “LEVEL” with ¢
or 4 .
3. Select the desired mode with the control dial.
The level display setting changes as follows:
AUTO 22
AUDIO 2
below
OFF
AUDIO 1 AUDIO 2
* Displayed only when one of the following sources is selected — FM, AM and tape.
• Press SEL (select) when the setting is complete.
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON: Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “SCM LINK” with ¢
or 4 .
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:
13
OFFON
CHANGER
22
CHANGER LINE IN
OFF
AUDIO 1 AUDIO 2
OFF
LINK ON LINK OFF
AUTO
OFF
ON
OFF
MUTING 1
MUTING 2
OFF 23
EN19-22.KS-FX901/801[U]2 24/3/05, 10:25 PM21