Filter
Top Products
ENGLISH
29
EXTERNAL COMPONENT OPERATIONS
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See page 19.)
This section is only for KS-FX725R.
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use – EXT IN” on page 25.)
1
Select the external component
(CD-CH).
• If “LINE IN”* does not appear on the display, see
page 25 and select the external input (“LINE IN”).
* Displayed only when one of the following sources is
selected — FM, AM and Tape.
Note on One-Touch Operation:
When you press CD-CH, the power automatically
comes on. You do not have to press to turn
on the power.
MO
TP
RDS
PTY
DISP
8 9 10 11 127
DAB
EN29-33KS-FX725R_F525[EE]f.pm5 7/12/01, 9:55 AM29