Filter
Top Products
29
ENGLISH
Selecting 24-hour or 12-hour clock
You can change the clock built in this unit either to 24-hour system or 12-hour system.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “24H/12H” with
¢ or 4.
3. Select “24H” or “12H” with the control dial.
The clock alternates between 24-hour system and 12-hour system.
24H 12H
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Alternates “AUDIO 1” setting and illumination display.
• OFF: Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “LEVEL” with
¢ or 4.
3. Select the desired mode with the control dial.
The level display setting changes as follows:
Selecting the display mode while using the CD changer
(ONLY FOR KD-SX878R)
You can change the initial indication on the display either to disc number or to elapsed playing
time, while using the CD changer.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “CH DISP” with
¢ or 4.
3. Select “DISC” or “TIME” with the control dial.
AUDIO 1 AUDIO 2
OFF
DISC
TIME
EN26-31.KD-SX878R/S777R[E]/f 08/09/2000, 04:06 PM29