Filter
Top Products
26
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard
from the speakers.
• The unit does not work
at all.
• SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
• Static noise while
listening to the radio.
• Disc automatically ejects.
• CD-R/CD-RW cannot be
played back.
• Tracks on the CD-R/CD-
RW cannot be skipped.
• Disc can be neither
played back nor ejected.
• Disc sound is sometimes
interrupted.
• “NO DISC” appears on
the display.
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
While holding SEL (select),
press for more than 2
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
Store stations manually.
Connect the antenna
firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW
with the component which you
used for recording.
Unlock the disc. (See page 15.)
While holding , press
0 for more than 2 seconds. Be
careful not to drop the disc
when it is ejected.
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and
connections.
Insert a disc into the loading slot.
Insert the disc correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer may
have function incorrectly due to
noise, etc.
Signals are too weak.
The antenna is not connected
firmly.
Disc is inserted upside down.
CD-R/CD-RW is not finalized.
Disc is locked.
The CD player may function
incorrectly.
You are driving on rough roads.
Disc is scratched.
Connections are incorrect.
No disc is in the loading slot.
Disc is inserted incorrectly.
General
Disc Playback
FM/AM
EN26-29_KD-S890[J]f.p65 1/3/03, 10:20 PM26