Filter
Top Products
5
ENGLISH
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 6 – 15.
To play a CD,
see pages 16 – 17.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 18 – 20.)
To drop the volume in a moment
Press briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold for more than one
second.
• If you turn off the power while listening to a
CD, CD play will start from where playback has
been stopped previously, next time you turn on
the power.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 21.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a disc
and adjust it as required during playback.
Volume level indicator
Volume level appears.
To decrease the volume.
To increase the volume.
1
3
2
7
89
10
11
12 RDS
MO
RND
DISP
TP PTY SCM
EN05-05.KD-S735R[E_EX]f.p65 8/22/02, 6:45 PM5