Filter
Top Products
17
ENGLISH
Selecting the level display
—LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “VOL 2” is
selected.
• VOL 1: Shows the volume level indicator.
• VOL 2: Alternates “VOL 1” setting and
illumination display.
• OFF: Erases the volume level indicator.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” or
“LEVEL” appears on the display.
2
Select “LEVEL” if not shown on the
display.
3
Select the desired mode—“VOL 1,”
“VOL 2,” or “OFF.”
4
Finish the setting.
Canceling Advanced SCM
—SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” or
“LEVEL” appears on the display.
2
Select “SCM LINK” if not shown on
the display.
3
Select “LINK OFF.”
4
Finish the setting.
To activate Advanced SCM (Sound Control
Memory), repeat the same procedure and press
+ to select “LINK ON” in step
3
.
CLOCK H CLOCK M
LEVEL SCM LINK
CLOCK H CLOCK M
LEVEL SCM LINK
OTHER MAIN FUNCTIONS
SEL
SEL
SEL
SEL
VOL 2VOL 1
OFF
EN17-18KD-S641[E_EX]f.p65 10/9/02, 1:44 PM17