Filter
Top Products
37
ENGLISH
Adjusting the contrast level
You can adjust the display contrast level (among 1 to 10). When shipped from the factory, the
display contrast level is at level 5.
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “CONTRAST” with ¢
or 4 .
3. Select the desired level with the control dial.
Selecting the scroll mode
You can select the scroll mode for the name display and disc information if they consist of
more than 12 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE”.
• AUTO: Repeats the scroll (5-second intervals in between).
• ONCE: Scrolls only once.
• OFF: Cancels Auto Scroll.
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “SCROLL MODE” with ¢
or 4 .
3. Select the desired mode with the control dial.
The scroll mode changes as follows:
Note:
Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1
second.
AUTO ONCE
OFF
EN30-41.KD-MX2800R[E]/2 99.5.21, 6:13 PM37