Filter
Top Products
33
ENGLISH
DAB TUNER OPERATIONS
SOURCE
KD-LX110R
SSM
PTY
OFF
TP/RDS
MODE
DISP
SEL
10
78
9
11 12
INT RPT RNDLOCALMONOSCM
TP/RDS
PTY
BAND
BAND
Tuning into an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After tuning
into an ensemble, you can select a service you
want to listen to.
1
Select the DAB tuner (DAB1–3).
2
Select the DAB band (DAB1, DAB2, or
DAB3).
Each time you press and hold the button,
the DAB band changes as follows:
Note:
This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
into an ensemble.
3
Start searching an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with your
DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD quality
sound without any annoying interference and
signal distortion. Furthermore, it can carry text,
pictures and data.
In contrast to FM broadcast, where each
programme is transmitted on its own frequency,
DAB combines several programmes (called
“services”) to form one “ensemble.”
With the DAB tuner connected with this unit,
you can enjoy these DAB services.
BAND
DAB1 DAB2 DAB3
Press ¢ to search
ensembles of higher frequencies.
Press 4 to search
ensembles of lower frequencies.
EN32-39.KD-LX110R[E]f 2/6/01, 2:33 PM33