Filter
Top Products
ENGLISH
27
Recalling the sound modes
Select the source while the “Link” indicator is
lit on the display.
The “Link” indicator starts flashing, and the sound mode stored
in memory for the selected source is recalled (and appears
on the display for a while).
Notes:
• You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 28.
• To adjust the bass/treble reinforcement levels and the BBE
II
temporarily, see pages 24 and 25. (Your
adjustments will be canceled if another source is selected.)
• By setting “CLOCK DISP” to “CLOCK OFF” (see page 32), you can always show the current
sound mode setting when the unit is turnd on.
SOURCE (ATT)
EN24-28.LX10R[E]/F 00.1.12, 6:36 PM27