JVC KD-HDR20 CD Player User Manual


 
ENGLISH
32
Symptoms Remedies/Causes
Bluetooth *
2
The unit does not detect the Bluetooth
device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (See page 12.)
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code both for the unit and target
device.
Select the device name from “SPECIAL,” then try to
connect again. (See page 13.)
Try to pair/connect from the Bluetooth device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “BT PHONE.”
Turn off, then turn on the unit.
(When the sound is not yet restored,) connect the
device again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
CD changer
“NO DISC” appears on the display. Insert a disc into the magazine.
“NO MAGAZINE” appears on the display. Insert the magazine.
“RESET 8” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
“RESET 1” – “RESET 7” appears on the
display.
Press the reset button of the CD changer.
The CD changer does not work at all. Reset the unit (see page 3).
*
2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
KD-HDR20[J]6.indb 32KD-HDR20[J]6.indb 32 08.11.24 4:13:41 PM08.11.24 4:13:41 PM