Filter
Top Products
ENGLISH
4 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 26.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
Select “24H/12H,” then “24H” (hour) or “12H” (hour).
@ Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
Detaching the control panel Attaching the control panel
CAUTION:
The lever comes out if you pressed the 0 button while the panel
is detached. If this happens, push the lever back into lock position
before attaching the panel.
Lever
EN02-05_KD-G737_001A_pre.indd 4EN02-05_KD-G737_001A_pre.indd 4 1/5/07 9:13:15 AM1/5/07 9:13:15 AM