Filter
Top Products
15
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS*
1
(bass), [–06 to +06]
Adjust the bass.
MID*
1
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE*
1
(treble), [–06 to +06]
Adjust the treble.
FAD*
2
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD*
1
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a well-
balanced sound at low volume level.
VOL (volume), [00 to 30 or 50*
3
]
Adjust the volume.
*
1
When you adjust the bass, mid-range, treble, or
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
“USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
Depending on the amplifier gain control setting. (See
page 17 for details.)
Continued on the next page
EN06-15_KD-G632_1_003A_pre.indd 15EN06-15_KD-G632_1_003A_pre.indd 15 10/17/06 12:29:54 PM10/17/06 12:29:54 PM