JVC KD-G464 CD Player User Manual


 
24
More about this receiver
Basic operations
Turning on the power
By pressing SOURCE on the receiver, you
can also turn on the power.
Turning off the power
If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Selecting the sources
When no disc is loaded in the receiver, “CD”
cannot be selected.
Without connecting to the CD changer,
“CD-CH” cannot be selected.
Tuner operations
Storing stations in memory
During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
Disc operations
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
General
This receiver has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format.
When a disc has been loaded, selecting “CD”
for the playback source starts disc play.
Inserting a disc
When a disc is inserted upside down, the disc
automatically ejects.
Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Playing a disc
While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Playing a CD-R or CD-RW
Use only “finalized” CD-Rs or CD-RWs.
This receiver can play back only the files of
the same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
This receiver can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
Some CD-Rs or CD-RWs may not play
back on this receiver because of their disc
characteristics, and for the following causes:
Discs are dirty or scratched.
Moisture condensation occurs on the lens
inside the receiver.
The pickup lens inside the receiver is dirty.
CD-R/CD-RW on which the files are
written with “Packet Write” method.
There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower
than that of regular CDs.
Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to discs.
EN24-29_KD-G464[UI]1.indd 24EN24-29_KD-G464[UI]1.indd 24 12/22/04 11:58:26 PM12/22/04 11:58:26 PM