Filter
Top Products
25
ENGLISH
To select the dimmer mode—DIMMER
You can dim the display at night (according to
your preference).
When shipped from the factory, dimmer is
deactivated.
• OFF: Cancels the dimmer.
• ON: Activates the dimmer.
To select the telephone muting—TEL
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• MUTING 1: Select if this setting can mute the
sounds.
• MUTING 2: Select if this setting can mute the
sounds.
• OFF: Cancels the telephone muting.
To select the amplifier gain control
—AMP GAIN
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select “LOW PWR”
to prevent them from being damaged.
When shipped from the factory, “HIGH PWR” is
selected.
• LOW PWR: You can adjust the volume level
from “VOL 00” to “VOL 30.”
Note:
If you change the setting from
“HIGH PWR” to “LOW PWR” while
listening at a volume level more than
30, the unit automatically changes the
volume level to “VOL 30.”
• HIGH PWR:You can adjust the volume level
from “VOL 00” to “VOL 50.”
PTY STBY PTY standby
TA VOL Traffic announcement
volume
P-SEARCH Programme search
DIMMER Dimmer mode
TEL Telephone muting
AMP GAIN Amplifier gain control
Indications Selectable values/items
Factory-preset See
settings page
OFF
OFF MUTING 1
MUTING 2
25
OFFOFF ON 25
LOW PWR HIGH PWR HIGH PWR 25
VOL 00 — VOL 30 or 50* VOL 20
OFF ON OFF
17
17
OFF
OFF
29 programme types
(see page 18)
14
* Depending on the amplifier gain control setting. (See below for details.)
EN24-26KD-G202201[E_EX_EU]f.p65 10/9/03, 11:21 AM25