Filter
Top Products
ENGLISH
48
3 Adjust the dimmer start time.
1 Turn the control dial to set the dimmer start
time.
2 Press ¢ to select “To.” Then, turn the
control dial to set the dimmer end time.
4 Exit from the setting.
Changing the display color
You can select your favorite display color for each source
(or all sources).
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
Setting the time for dimmer
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Follow steps 1 to 3 on page 45.
• In step 2, select “DISP.”
• In step 3, select “Dimmer.”
2 Select “Time Set.”
Category Indication Item
( : Initial)
Setting, [reference page]
AUDIO
Amp Gain
Amplifier gain
control
• High PWR
• Low PWR
: Volume 00 – Volume 50
: Volume 00 – Volume 30 (Select if the maximum power of each
speaker is less than 50 W to prevent damaging the speaker.)
Rear Spk *
9
Rear speaker output
• On
• Off
: Select this to turn on the rear speaker output.
: Cancels.
COLOR
Color Sel
Color selection
Initial: All
Source;
Color: Pale
: Select your favorite display color for each source (or for all
sources), [48, 49].
Color Set
Color setting
Red
Green
Blue
—
Day Color
NightColor
00 — 11
00 — 11
00 — 11
: Create your own colors, and select them for the display color,
[49].
: User color during the day time *
10
.
: User color during the night time *
10
.
: Initial: Day Color: 07, NightColor: 05
: Initial: Day Color: 07, NightColor: 05
: Initial: Day Color: 07, NightColor: 05
Key Illum
Illumination switch
• Red
• Green
: You can select some of the buttons illumination according to
your preference.
*
9
Displayed only when Dual Zone is activated (see page 27).
*
10
Depends on the “Dimmer” setting.
EN44-51_KD-DV7402_001A_f.indd 48EN44-51_KD-DV7402_001A_f.indd 48 2/20/08 12:14:51 PM2/20/08 12:14:51 PM