Filter
Top Products
ENGLISH
42
Storing your own sound
adjustments
1
2
3 Enter the sound adjustment mode.
4 Select a frequency to adjust.
5 Adjust the level.
6 Repeat steps 4 and 5 to adjust the other
frequency bands.
7 Store the adjustments in the respective
mode.
Adjusting the sound
1
2 Adjust the level.
FAD *
1
(fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL (balance)
Adjust the left and right speaker
balance.
L06 to R06
LOUD (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
SUB.W *
2
(subwoofer)
Adjust subwoofer output balance.
00 to 08;
initial: 04
VOL.A *
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
–05 to +05;
initial: 00
VOL (volume)
Adjust the volume.
00 to 30
(or 50) *
4
*
1
If you are using a two-speaker system, set the fader
level to “00.”
*
2
This takes effect only when a subwoofer is connected.
*
3
You cannot make an adjustment for FM. “FIX”
appears.
*
4
Depending on the amplifier gain control setting. (See
page 45 for details.)
EN40-47_DV7308_001A_1.indd 42EN40-47_DV7308_001A_1.indd 42 1/18/07 5:14:11 PM1/18/07 5:14:11 PM