Filter
Top Products
ENGLISH
42
Symptom Remedy/Cause
USB memory playback
• Noise is generated. The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• “CHECK” keeps flashing on the display. • Readout time varies depending on the USB memory.
• Do not use too many hierarchies and folders.
• Turn off the power then on again.
• “NO FILE” flashes on the display. Attach a USB memory that contains tracks encoded in an
appropriate format.
• “NOT SUPP” appears on the display and track
skips.
The track is unplayable.
• “READ” and “FAILED” appear alternately
on the display, then returns to the previous
source.
• The attached USB memory may be malfunctioning, or
may not have been formatted correctly. The files included
in the USB memory are corrupted.
• Do not pull out or attach the USB memory while “CHECK”
is shown.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), cyrillic
alphabets, numbers, and a limited number of symbols (see
page 33).
• While playing a track, sound is sometimes
interrupted.
MP3/WMA tracks have not been properly copied into the
USB memory. Copy MP3/WMA tracks again into the USB
memory, and try again.
CD changer
• “NO DISC” appears on the display. Insert a disc into the magazine.
• “NO MAG” appears on the display. Insert the magazine.
• “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
DAB
• “NO DAB” appears on the display. Move to an area with stronger signals.
• “RESET 08” appears on the display. Connect this unit and the DAB tuner correctly and reset the
unit (see page 2).
• The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly. Then, reset
the unit (see page 2).
• “ANT NG” appears on the display. Check the cords and connections.
EN34-45_DV6207[EE]f.indd 42EN34-45_DV6207[EE]f.indd 42 12/29/05 6:41:05 PM12/29/05 6:41:05 PM