JVC KD-AR800 CD Player User Manual


 
24
ENGLISH
Selecting preset sound modes
(iEQ: intelligent equalizer)
You can select a preset sound mode (iEQ:
intelligent equalizer) suitable to the music genre.
There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1
again.
1
Press MODE to enter the functions
mode.
2
Press EQ (equalizer) while “MODE”
is still on the display.
The last selected sound mode
is called up.
3
Select the sound mode you want.
As you turn the control
dial, the sound modes
change as follows:
FLAT O HARD ROCK O R&B O
POP O JAZZ O DANCE MUSIC O
COUNTRY O REGGAE O CLASSIC O
USER 1 O USER 2 O USER 3 O
(back to the beginning)
Ex.: When you select “HARD ROCK”
To cancel the preset sound mode, select
“FLAT” in step
3
.
Notes:
You can adjust the preset sound modes temporarily.
However, your temporary adjustments will be reset
when you select another sound mode.
For details about the preset settings of each sound
mode, see table on page 40.
For showing the iEQ pattern on the display during
play, select “EQ & LEVEL” or “SILENT” for the
level meter. See also page 28.
When using the remote controller:
Press SOUND repeatedly.
Each time you press the
button, the sound modes
change as follows:
Indication pattern changes
for each sound mode.
SOUND
SOURCE
R
F
U
D
ATT
USER 1,USER 2, USER 3