JVC KD-AR760 CD Player User Manual


 
31
ENGLISH
This receiver can display only one-byte
characters. No other characters can be
correctly displayed.
This receiver can play back MP3/WMA files
meeting the conditions below:
– Bit rate: 8 kbps — 320 kbps
Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
– Disc format: ISO 9660 Level 1/ Level 2,
Romeo, Joliet, Windows long file name
The maximum number of characters for file/
folder names vary among the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo*: up to 128 (72) characters
– Joliet*: up to 64 (36) characters
– Windows long file name*: up to 128 (72)
characters
* The parenthetic figure is the maximum
number of characters for file/folder names
in case the total number of files and folders
is 313 or more.
This receiver can recognize the total of 512
files, of 200 folders, and of 8 hierarchies.
This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this difference
becomes noticeable.
This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and MP3
PRO formats.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice formats.
– WMA files which are not based upon
Windows Media
®
Audio.
– WMA formatted files copy-protected with
DRM.
– Files which have the data such as WAVE,
ATRAC3, etc.
The search function works but search speed is
not constant.
Changing the source
If you change the source, playback also stops
(without ejecting the disc).
Next time you select “CD” for the playback
source, disc play starts from where it has been
stopped previously.
Ejecting a disc
If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
General settings—PSM
If you have change the setting from
“TAG DISP OFF” to “TAG DISP ON” while
playing MP3/WMA file, the tag display will
be activated when the next file starts playing.
If you change the “AMP.GAIN” setting from
“HIGH POWER” to “LOW POWER” while
the volume level is set higher than “VOL 30,”
the receiver automatically changes the volume
level to “VOL 30.”
Other main functions
If you try to assign a title to a 31st disc or to
the 31st station frequency, “NAME FULL”
appears. Delete unwanted titles before
assignment.
Titles assigned to discs in the CD changer can
also be shown if you playback the disc from
the receiver.
The control panel moves to its previous angle
each time you turn on the power.
EN30-35_KD-AR760_G710[J]f.indd 31 10/9/04, 11:40:00 AM