JVC KD-APD49 CD Player User Manual


 
20
ENGLISH
Symptoms Remedies/Causes
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
The unit does not work at all. Reset the unit (see page 3).
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
Disc playback
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back.
Tracks on the CD-R/CD-RW cannot be skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component which
you used for recording.
Disc can neither be played back nor ejected. Unlock the disc (see page 9).
Eject the disc forcibly (see page 3).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
“NO DISC” appears on the display.
“PLEASE” and “EJECT“ appear alternately on
the display.
Insert a playable disc into the loading slot.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Preset value setting for each sound mode
Sound mode
Preset value
BASS (bass) MID (mid-range) TRE (treble) LOUD
(loudness)
Freq. Level Q Freq. Level Q Freq. Level Q
USER 60 Hz 00 Q1.0 1.0 kHz 00 Q1.25 7.5 kHz 00 Q1.25
OFF
ROCK 100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02 Q1.25
CLASSIC 80 Hz +01 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +03 Q1.25
POP 100 Hz +02 Q1.0 1.0 kHz +01 Q1.25 10.0 kHz +02 Q1.25
HIP HOP 60 Hz +04 Q1.0 1.0 kHz –02 Q1.0 10.0 kHz +01 Q1.25
JAZZ 80 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +03 Q1.25
Freq.: Frequency Q: Q-slope
EN14-23_KD-APD49[J]f.indd 20EN14-23_KD-APD49[J]f.indd 20 11/1/07 3:11:50 PM11/1/07 3:11:50 PM