JVC KD-A605 CD Player User Manual


 
ENGLISH
10
Playing a file on a USB device
This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to
the unit.
You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations, see pages 20 – 22.
1
Turn on the power.
2
Connect a USB.
All tracks will be played repeatedly until you change the source
or disconnect a device.
USB memory
If a USB device has been attached...
Playback starts from where it has been stopped
previously.
If a different USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the unit.
“NO USB” appears. Press SRC to listen to another
playback source.
Cautions:
Avoid using the USB device if it might hinder your
safety driving.
Do not pull out and attach the USB device repeatedly
while “READING” is shown on the display.
Do not start the car engine if a USB device is
connected.
This unit may not be able to play the files depending
on the type of USB device.
Operation and power supply may not work as
intended for some USB devices.
You cannot connect a computer to the USB input
terminal of the unit.
Make sure all important data has been backed up to
avoid losing the data.
Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
Some USB devices may not work immediately after
you turn on the power.
For more details about USB operations, see pages 32
and 33.
EN02-11_KD-A605[J]f.indd 10EN02-11_KD-A605[J]f.indd 10 11/12/08 4:42:19 PM11/12/08 4:42:19 PM