JVC KD-S550 CD Player User Manual


 
24
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service center.
Symptoms
CD cannot be played back.
CD sound is sometimes
interrupted.
“NO DISC” appears on the
display.
Sound cannot be heard from
the speakers.
SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Static noise while listening
to the radio.
CD can be neither played
back nor ejected.
The unit does not work at
all.
Remedies
Insert the CD correctly.
Stop CD play while driving
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading
slot.
Insert it correctly.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Press
and 0 at the
same time for more than 2
seconds. Be careful not to
drop CD when it is ejected.
Press
and SEL at
the same time for more than 2
seconds to reset the unit. (The
clock setting and preset
stations stored in memory are
erased.) (See page 2.)
Causes
CD is inserted upside down.
You are driving on rough
roads.
CD is scratched.
Connections are incorrect.
No CD is in the loading slot.
CD is inserted incorrectly.
The volume control is turned
to the minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
The CD player may function
incorrectly.
The built-in microcomputer
may function incorrectly due to
noise, etc.
EN23-25.KD-S600/S550[J]/f 11/3/99, 11:29 AM24