Filter
Top Products
ENGLISH
2
Attaching the front speakers to the GM-X50 series display
Using the speaker brackets, you can attach the front speakers to the side of the display.
• Do not loosen the screws other than the protective screws.
• Use only the supplied mounting screws for attaching the front speakers.
1. Remove the protective screws on the back of the display
with phillips screwdriver.
2. Attach the front speaker to the back of the display.
3. Tighten the mounting screws firmly with phillips screwdriver.
• When moving the display, do not hold the speakers.
• The speakers are not of anti-magnetic type.
Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers.
Protective
screw
Protective
screw
1 Turn the mounting screws with phillips
screwdriver, leaving a length of about 3 mm.
2 Hook the speaker bracket onto three mounting screws
through the screw holes (A), and slide it down.
Screw hole (A)