Filter
Top Products
– 8 –
English
When connecting the AC power cord into a wall outlet, the
unit automatically starts the display demonstration.
To stop the display demonstration, press any button on the
unit or the remote control.
To start the display demonstration manually
Press and hold DEMO for more than 2
seconds.
To stop the demonstration, press any button.
CANCEL
DEMO
Connecting Other Equipment
You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.
Be sure that the plugs of the audio cords are color-coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
ANTENNA
AUX
GND
GND
AM EXT
FM
RIGHT
LEFT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
LINE VOLTS
110V
127V
220V
230V
-240V
To connect audio equipment
Connect the audio output jacks on the other equipment and
the AUX jacks on the rear, using an audio cord (not supplied).
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your
area with the voltage selector on the rear of the unit.
• DO NOT plug in before setting the voltage
selector on the rear of the unit and all connection
procedures are complete.
To audio output
Audio equipment
To a wall outlet
ANTENNA
AUX
GND
GND
AM EXT
FM
RIGHT
LEFT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
LINE VOLTS
110V
127V
220V
230V
-240V
If the wall outlet does not match the AC plug, use
the supplied AC plug adaptor.
Use a screwdriver to rotate the voltage selector so the voltage
number the voltage mark is pointing at is the same as the
voltage where you are plugging in the unit.
NOW, you can plug in the unit and other
connected equipment FINALLY!
Voltage mark
ANTENNA
AUX
GND
GND
AM EXT
FM
RIGHT
LEFT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
LINE VOLTS
110V
127V
220V
230V
-240V
LINE VOLTS
110V
127V
220V
230V
-240V
EN01-11.MX-J30[U]/3 99.3.17, 11:58 AM8