Filter
Top Products
– 8 –
DIGITAL OUT
OPTICAL
( )
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX IN jacks by using audio cords (not
supplied).
To audio output
To connect audio equipment with an optical digital
input terminal
You can record CD sound onto the connected digital
equipment.
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
DIGITAL OUT [OPTICAL] terminal.
NOW, you can plug in the unit and other
connected equipment FINALLY!
Cancelling the Display Demonstration
When connecting the AC power cord into an outlet, the unit
automatically starts display demonstration.
To cancel the display demonstration, press any button on
the unit or on the remote control.
If you press one of the following buttons — source
buttons, 0 (CD tray open/close) button, and disc
number buttons (CD1, CD2, CD3)
The unit turns on.
To start the display demonstration manually
Press and hold DEMO on the unit for more than
2 seconds.
To optical
digital input
Before connecting
the other equipment,
remove the
protective plug from
the terminal.
Audio equipment
with an optical digital
input
Protective
plug
AUX IN
Audio/video
equipment
Connecting Other Equipment
You can connect both analog and digital equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect an analog component
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
CANCEL
/DEMO
EN01-11.MX-G50[J]_f 00.12.22, 5:17 PM8