JVC HX-Z10 Stereo System User Manual


 
10
To enjoy heavy sound
You can enjoy heavy sound by using Sound Turbo. This
function boosts the low and high frequency sound.
Activating Sound Turbo cancels the sound mode and/or
subwoofer adjustment.
Press SOUND TURBO.
The SOUND TURBO indicator lights up on the
display and the SOUND TURBO lamp also
flashes. The subwoofer level increases to the
maximum level (LEVEL 2).
Each time you press SOUND TURBO, Sound Turbo is turned on
(subwoofer LEVEL 2) or off (subwoofer LEVEL 0).
If you press SUBWOOFER + / – or select a sound mode
during activating Sound Turbo
Sound Turbo is canceled.
Selecting the Sound Modes
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA—Sound Effect Amplifier—modes) and 3
user modes. This function only affects the playback sound,
but does not affect recording.
To select the sound modes,
turn SOUND MODE (or
press SOUND MODE on
the remote control) until the
sound mode you want
appears on the display.
When one of the sound modes is selected, the lamp for the
selected sound mode and the SOUND MODE lamp flash.
When one of the user modes (USER 1, USER 2, or USER 3) is
selected, only the SOUND MODE lamp flashes.
The sound modes change as follows:
When using the remote control, the sound mode changes only
clockwise in the above sequence.
Continued
V
O
L
U
M
E
ART REVERSE M
EC
BEEP
ON/OFF
FADE
MUTING
VOLUME
BEEP
ON/OFF
FADE
MUTING
VOLUME
S
U
B
W
O
O
F
E
R
L
E
V
E
L
SOUND
TURBO
REC
RANDOM
REPEAT
SOUND
TURBO
SOUND
MODE
STA
S
O
U
N
D
M
O
D
E
S
U
B
W
O
O
F
E
R
L
E
V
E
L
D
O
SEA mode lamps
SOUND MODE lamp
Surround mode lamps
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted in 32 steps (VOLUME
MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).
The volume level control does not
affect recording.
Turn VOLUME + / – clockwise (+)
to increase the volume or
counterclockwise (–) to decrease it.
When using the remote control, press
VOLUME + to increase the volume or
VOLUME – to decrease it.
When adjusting the volume, the back color
on the display changes as increasing/
decreasing the level—not lighting blue
purple pink red.
To turn off the volume level temporarily
On the remote control ONLY:
Press FADE MUTING.
The volume level gradually decreases to
“VOLUME MIN.”
To restore the sound, press the button again.
To listen with headphones
Connect a pair of headphones to the PHONES jack on the
unit. The sound will no longer come out of the speakers.
Disconnecting a pair of headphones from the PHONES
jack activates the speakers again.
DO NOT set the volume to a high level before
connecting or putting on headphones.
DO NOT turn off (standby) the unit with the volume
set to an extremely high level; otherwise, a sudden
blast of sound can damage your hearing, speakers
and/or headphones when you turn on the unit or
start playing any source next time.
REMEMBER, you cannot adjust the volume level
while the unit is off (standby).
Reinforcing the Bass Sound
Changing the subwoofer level
You can select one of the 3 subwoofer levels—LEVEL 0
(MIN LEVEL), LEVEL 1, and LEVEL 2 (MAX LEVEL).
This function only affects the playback sound, but does not
affect your recording.
Press SUBWOOFER LEVEL + to increase
the subwoofer level or SUBWOOFER
LEVEL – to decrease it.
The SUBWOOFER indicator lights up on the
display.
The SUBWOOFER lamp also flashes when LEVEL 1 or LEVEL 2
(MAX LEVEL) is selected. The lamp stops flashing when LEVEL 0
(MIN LEVEL) is selected.
S
U
B
W
O
O
F
E
R
L
E
V
E
L
SOUND
TURBO
DANCE
OFF
(Canceled)
HALL STADIUM
ROCK
POP
CLASSICUSER 1USER 2
USER 3
SOUND TURBO
SUBWOOFER
SOUND MODE D A N C E HALL
REC ROCK CLASSICPOP
STADIUM
EN09-12.HX-Z10&30[J]f 03.2.7, 3:30 PM10