JVC FS-M3 Stereo System User Manual


 
– 13 –
Playing Back Tapes
Use only type I normal tapes.
The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchroller and
the capstan.
Loading a Tape
1 Press 0 EJECT to open the
tape deck door.
2 Insert a recorded tape with the open side
down and playback side facing out from the
unit.
3 Close the tape deck door.
The TAPE indicator appears on the display.
Tape Playback
1 When the unit is turned on,
press TAPE.
2 Press 3/8.
Playback starts.
“PLAY” and the 3 indicator appear
on the display.
3 To stop playback, press 7.
To interrupt playback
Press 3/8.
The 3 indicator starts blinking and
“PAUSE” appears on the display.
To resume playback, press 3/8 again.
Rewind/Fast Forward
1 Press 4 or ¢ to rewind
or fast forward the tape.
“REW” or “FF” appears on the
display.
2 Press 7 to stop rewinding or
fast forwarding.
The tape stops automatically at the end of the rewinding or
fast forwarding.
EJECT
TAPE
PLAY/PAUSE
STOP/CLEAR
PLAY/PAUSE
SEARCH/TUNING
STOP/CLEAR