Filter
Top Products
20
3
Adjust the parameter.
4
Repeat steps
2
to
3
to adjust other parameters.
5
Finish setting.
Turning On or Off the Key-Touch Tone
Changing the Display Brightness
You can dim the display window.
Setting the Clock
Without setting the built-in clock, you cannot use Daily/
Recording Timers (see page 37) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
1
Activate clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2
Adjust the hour.
3
Adjust the minute.
Now the built-in clock starts working.
To check the current time during play
Turning Off the Power
Automatically
With Sleep Timer, you can fall asleep listening to music.
• You can set Sleep Timer only while the System is turned
on.
1
Specify the time (in minutes).
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
GAMMA
Adjust if the neutral color is bright or
dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS
Adjust if the picture is bright or dark
as a whole (–8 to +8).
CONTRAST
Adjust if the far and near position is
unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
Remote control: Main unit:
BEEP OFF
BEEP ON
/BEEP
2
sec.
BEEP OFF
BEEP ON
Remote
ONLY
INFO
Main Unit
ONLY
• If you press the button repeatedly, you can
change the shut-off time.
CLOCK
/TIMER
P
R
E
S
E
T
SET
/DISPLAY
P
R
E
S
E
T
SET
/DISPLAY
SET
/DISPLAY
Clock
Source information
2
sec.
Remote
ONLY
INFO
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
SLEEP 90SLEEP 120
Canceled
HX-GD7.book Page 20 Wednesday, May 19,2004 10:21 AM