Filter
Top Products
Playback
18
When a DivX file is played.
• You can change the time information mode (except for MP3/JPEG/
DivX). (See page 22.)
• You can also check the playback information on the TV screen. (See
page 21.)
Screen saver
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 32.
You can move back the playback position by
10 seconds from the current position.
7 During playback
On the remote control:
• This function works in the same title.
• This feature may not work for some discs.
7 During playback
Press y or 1.
Each time you press the button, the
search speed changes (x2, x5, x10,
x20, x60).
To return to normal speed playback
Press
3 (play button).
On the center unit:
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (x5=x20).
NOTE
• When a DVD VIDEO, DVD VR, VCD, SVCD or DivX is played
back, no sound comes out during fast-forward/reverse search.
• When a CD is played back, sound is intermittent and low during fast-
forward/reverse search.
• This feature may not work for some discs.
• For MP3,
the search speed is not shown.
• The search speed for DivX is y1, y2, y3 for forward search,
and 11, 12 and 13 for reverse search.
7 Using x / 4 buttons
7 For DVD VIDEO/DVD VR
(chapter): During playback
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/JPEG/DivX (track/file): During playback or while
stopped
Press x or 4 repeatedly.
NOTE
• When playing back an MP3/JPEG, you can make operations using the
file control display. (See page 24.)
• When playing back a DivX file, pressing Cursor
3/2 may skip
the scene a few minutes forward/backward.
• This feature may not work for some discs.
7 Using number buttons on the remote control
7 For DVD VIDEO/DVD VR (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/JPEG/DivX (track/file):
During playback or while stopped
Press number buttons (0-10, +10) to select
the desired number.
• For details on using the number buttons, see “How to use the
number buttons” below.
One Touch Replay
111
2
33
0
:
1
3
G
1
22
T
.
.
Signal and speaker indicators
Group number Track number
Elapsed playing time (minute:second)
(during playback only)
Track number
Pressing FL DISPLAY
Fast-forward/fast-reverse
search
Skip to the beginning of a
desired selection
How to use the number buttons
To select 3: Press 3.
To select 14: Press +10, then 4.
To select 24: Press +10 twice, then 4.
To select 40: Press +10 three times, then 10.
Or press +10 four times, then 0.
See page 16 for button locations.
THS33-11[B]-05basic.fm Page 18 Monday, February 14, 2005 2:57 PM