Filter
Top Products
16
Playing Back Tapes
You can play back type I tapes.
Playing Back a Tape
1
Press ) on the unit.
2
Put a cassette in with the exposed part of the
tape down.
3
Close the cassette holder gently.
4
Press TAPE 2 3.
The unit automatically turns on and the tape
play starts. The tape direction indicator
(3 or 2) flashes slowly on the display.
• Each time you press the button, the tape direction
changes.
3 : plays the front side.
2 : plays the reverse side.
When the tape plays to the end, the deck automatically
stops if the reverse mode is set to or . (See “To
play both sides—Reverse Mode.”)
To stop playing, press 7.
To fast-wind to the left or to the right,
press ¢ or 4 while the tape is not
running.
The tape direction indicator (3 or 2) starts
flashing quickly on the display.
To remove the cassette, press ) on the unit.
To play both sides—Reverse Mode
You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.
On the unit ONLY:
Press REV.MODE.
• Each time you press the button, reverse mode
changes as follows:
: The deck automatically stops after playing both
sides of the tape. (Stops when playback in the 2
direction is finished.)
: The deck continues to play both sides of the tape
until 7 is pressed.
: The deck automatically stops after playing one
side of the tape.
The use of the C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
REV.MODE
TAPE
AUTO REVERSE
P
H
O
N
E
S
P
H
O
N
E
S
AUTO REVERSE
P
H
O
N
E
S
AUTO REVERSE
EN13-16_UX-P30[A]f.pm6 03.6.4, 5:20 PM16