15
Using the CD Player
English
FS-SD550(US)/ GNT0008-008A/ English
6
Press the SET button.
7
Repeat steps 5 and 6 to select the other
tracks for the program.
You can see the total playback time of programmed
tracks on the display. Also, you can see the programmed
tracks on the music calendar.
8
Press the CD
#
/
8
button.
The System plays the tracks in the order you have pro-
grammed them.
■ You can skip to a particular program track by pressing the
4 or ¢ button during Program Play.
■ To stop playing, press the 7 button once.
To confirm the programmed tracks while the CD
player is stopped,
each time press the 4 or ¢ but-
ton; the tracks making up the program will successively be
displayed in the programmed order.
To delete all the tracks in the program,
in stop mode,
press the 7 button. Pressing the CD 0 button to open the
Top Cover will also clear the programmed tracks.
To exit the program mode once,
while the CD Player
is stopped, press the PROGRAM button to light off the
“PROGRAM” indicator.
• If the total playback time of the programmed tracks ex-
ceeds 99 minutes 59 seconds, the total playback time will
go out on the display.
• If you try to program the 33rd track, “MEMORY FULL” ap-
pears on the display for about 2 seconds.
To Modify the Program
Modify the contents of the program while the CD Player is
stopped.
Each time you press the CANCEL button, the last track in
the program is deleted. To add new tracks to the end of the
program, repeat above steps 5 to 7.
Random Play
The tracks will play in no special order when you use this
mode.
1
Press the RANDOM button on the
Remote Control.
The “RANDOM” indicator lights up on the display.
2
Press the CD
#
/
8
button.
The tracks are played in random order.
To skip a track during playback,
press the ¢ button
to jump to the next track in the random sequence. Press the
4 button to jump back to the start of a track being played.
To exit Random Play mode,
while the CD Player is
stopped, press the RANDOM button to light off the “RAN-
DOM” indicator and carry out Normal Play, or press the CD
0 button to open the Top Cover.
Repeating Tracks
You can repeat all tracks or individual track, as many times
as you like.
Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button,
as shown below.
=
ALL
=
blank display
=
(back to the
beginning)
: Repeats one track.
ALL
: In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks
in the program.
In Random Play mode, repeats all the tracks
in random order.
To exit Repeat mode,
press the REPEAT button until the
Repeat indicator on the display goes out.
■ In Random Play, cannot be selected.
■ Repeat mode remains in effect even when you change the
play mode.
UP
SET
DOWN
Program order number
Total playback time of the programmed tracks
(After 2 seconds)
FS-SD5&7&9.book Page 15 Friday, March 30, 2001 10:06 AM