Filter
Top Products
23
Maintenance
To get the best performance from the unit, keep your discs, tapes, and mechanism clean.
Cleaning the unit
• Stains on the unit
Should be wiped off with a soft cloth. If the unit is
heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe
clean with a dry cloth.
• Since the unit may deteriorate in quality, become
damaged or have its paint peel, be careful about
the following.
—DO NOT wipe it with a rough cloth.
—DO NOT wipe it strongly.
—DO NOT wipe it with thinner or benzine.
—DO NOT apply any volatile substances such as
insecticides to it.
—DO NOT allow any rubber or plastic to remain in
contact with it for a long time.
Handling discs
• Remove the disc from its case
by holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface
of the disc, or bend the disc.
• Put the disc back in its case
after use to prevent warping.
• Be careful not to scratch the
surface of the disc when
placing it back in its case.
• Avoid exposure to direct
sunlight, temperature
extremes, and moisture.
To clean the disc
Wipe the disc with a soft cloth
in a straight line from center to
edge.
DO NOT use any solvent—such as conventional
record cleaner, spray, thinner, or benzine—to clean
the disc.
EN18-26_FS-H30[J]f.pm6 03.2.5, 5:01 PM23