Filter
Top Products
23
ENGLISH
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON: Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “SCM LINK” with ¢
or 4 .
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:
Selecting the level display
You can select the level display according to your preference. When shipped from the factory,
“AUDIO 2” is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator
• AUDIO 2: Alternates “AUDIO 1” setting and illumination display
• OFF: Erases the audio level indicator and the equalization pattern indicator
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “LEVEL” with
¢ or 4 .
3. Select the desired mode with the control dial.
The level display setting changes as follows:
LINK ON LINK OFF
AUDIO 1
OFF
AUDIO 2
EN20-25KD-SX975/SX875[U]f 18/1/01, 09:1423