Filter
Top Products
10
ENGLISH
When an FM stereo broadcast is hard to
receive:
1 Press M (MODE) to enter the
functions mode while listening to
an FM stereo broadcast.
“MODE” flashes on the upper part
of the display.
2 Press MO (monaural), while
“MODE” is still flashing on the
display, so that the MO indicator
lights up on the display.
Each time you press the button,
the MO indicator lights up and
goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
To tune in to stations of
higher frequencies
To tune in to stations of
lower frequencies
MO (monaural) indicator
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold ¢ or 4
until “MANU” (manual) starts
flashing on the display.
3
Tune in to a station you want while
“MANU” (manual) is flashing.
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM) until you release
the button.
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
EN09-12_KD-SX995[U]f.p65 12/24/02, 10:17 AM10