JVC CA-UXNB7DAB Speaker System User Manual


 
7
This System can play back the following discs—regular CD and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
• When playing back the MP3 track, MP3 indicator appears on the display.
To Set a Disc
1
On the System
2 3
On the System
The disc cover on
the System opens.
Place a disc correctly with its label side up,
then press down on the portions around
the disc’s center hole until you hear a click.
• When removing the disc, take out the disc
by holding it at the edge with pressing the
System’s pivot lightly.
The disc cover on
the System closes.
• Do not close
forcibly the disc
cover with the
hand.
Basic Disc Operations
To
Press
On the
System
On the
remote
Playback the disc
Current track number and elapsed playing time appear on the
main display.
• During playback, press again to stop playing for a moment.
Stop playback
• While playback is stopped, total track number and total playing
time (for MP3 disc, group number and track number) appear on
the main display.
Select a track
Increases the track numbers.
Decreases the track numbers.
Select a group (MP3
only)
Increases the group numbers while playback is stopped.
Decreases the group numbers while playback is stopped.
Forward search /
Reverse search
Fast-forwards the track by pressing briefl y.
To stop searching, press 6.
Fast-reverses the track by pressing briefl y.
To stop searching, press 6.
NOTES
• If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is loaded,
playback will not start.
• If no disc is inserted, “NO DISC” appears on the main display.
Playing Back Discs
EN_01_20_UX-NB7DAB[B]ff.indd 7EN_01_20_UX-NB7DAB[B]ff.indd 7 06.7.6 11:27:10 AM06.7.6 11:27:10 AM