22
Using the Timers
There are three timers available—Daily Timer, Recording
Timer, and Sleep Timer.
Before using the timers, you need to set the unit’s clock (see
page 9).
Using Daily Timer and Recording Timer
You can set the timer whether the unit is on or off.
How the timer actually works
When the on-time comes, the unit automatically turns on
(the [timer] and the selected timer mode [DAILY or REC]
indicators flash just before the on-time, and continue flashing
while the timer is operating). Then, when the off-time comes,
the unit automatically turns off (standby).
The timer setting remains in memory until you change it.
• When the DAILY indicator is lit on the display, the timer
acts as the Daily Timer. Once the timer has been set, it will
be activated at the same time everyday until the timer is
turned off.
• When the REC indicator is lit on the display, the timer acts
as the Recording Timer. After the timer-recording finishes,
the details of the setting remain stored but the timer is
turned off.
Before you start...
When using “
TUNER” as the source to play, make sure to
select the desired station before turning off the power.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start over from step
1
.
• For UX-J60 only, you can also use CLOCK/TIMER on the
unit for this operation.
1
Press CLOCK/TIMER.
The (timer) indicator lights up and the
timer mode (DAILY or REC) indicator
flashes on the display.
The unit enters on-time setting mode.
2
Set the on-time when you want the unit to
turn on.
1) Press UP or DOWN to set the hour, then press
CLOCK/TIMER.
2) Press UP or DOWN to set the minute, then press
CLOCK/TIMER.
The unit enters off-time setting mode.
3
Set the off-time when you want the unit to
turn off (standby).
1) Press UP or DOWN to set the hour, then press
CLOCK/TIMER.
2) Press UP or DOWN to set the minute, then press
CLOCK/TIMER.
The unit enters the timer selecting mode.
4
Press UP or DOWN to select the timer
(Daily Timer or Recording Timer) with the
source to play, then press CLOCK/TIMER.
• Each time you press UP or DOWN, the timer mode
and the source change as follows:
DAILY
TUNER: tunes in to the last station you were
listening to. (Daily Timer)
REC
TUNER: records the last station you were
listening to. (Recording Timer)
• Put a recordable cassette into the deck.
DAILY
CD: plays a disc. (Daily Timer)
• Load a disc.
DAILY
TAPE: plays a tape. (Daily Timer)
• Make sure that a tape is in the cassette deck.
• Make sure that the tape direction is correct.
The unit enters the volume level setting mode.
CLOCK
/TIMER
[
DAILY
]
[
DAILY
]
UP
DOWN
CLOCK
/TIMER
CD
TAPE
TUNER
TUNER
DAILY
REC
DAILY
DAILY
Continued
EN20-26_UX-J60&50[B]f.pm6 02.12.23, 9:34 AM22