– 21 –
English
Auto Edit Recording
By using Auto Edit Recording, you can record the CD tracks
to fit the tape. Auto Edit Recording makes a program by
selecting the CD tracks in numerical order. However, to
prevent the end of the last track on the front side from being
cut off, the last track is selected so as to fit on the remaining
tape length.
On the unit ONLY:
1
Place a disc correctly on the circle of the disc
tray, with its label side up.
• If the current playing source is not the CD player, press
CD 6, then 7 before going to the next step.
2
Press EDIT.
3
Press the disc number button (CD 1 to CD 3)
for the disc you want to record from.
To change the tape length manually
If the tape length selected is not satisfactory, you can
change the tape length by pressing 4 or ¢.
You can select the tape length among the following — 40,
46, 50, 54, 60, 64, 70, 74, 80, 84, and 90.
4
Press SET.
• Each time you press the button, the tracks to be recorded
on the front side (SIDE-A) and on the reverse side
(SIDE-B) alternate.
EDIT
2 31
2 31
2 31
Tracks to be recorded on the
reverse side (SIDE-B) appear.
2 31
9
13
10
14
11
8
12
5
Put a recordable cassette of appropriate
length into deck B.
6
Press REVERSE MODE so that the Reverse
Mode indicator lights up as .
• Without turning on the Reverse Mode ( ), recording
will stop when the front side of the tape is recorded.
7
Press CD REC START.
The indicator lights up on the display.
Deck B starts recording then, about 10 second later, the
CD player starts playing.
When the recording is done, “CD REC FINISHED”
appears on the display, and the CD player and deck B
stop.
• If a tape has not been rewound, deck B will rewind the
tape before it starts recording.
• A 10-second blank portion is automatically created at
the beginning of each side of the tape.
To stop during Auto Edit Recording
• Press 7 so that a 4-second blank portion is created on the
recorded tape. (Remember a 4-second blank is important
when using Music Scan – see page 18.)
OR
• Press REC START/STOP. No 4-second blank portion is
created on the recorded tape.
To cancel Auto Edit Recording
• Press PROGRAM/RANDOM before or after play. (The
unit enters Program, Random, or Continuous Play mode.)
OR
• Press 0 for the disc you have selected.
To remove the cassette, press EJECT 0 for deck B.
The optimum tape length for the disc appears.
EN19-26.MXJ55/530R[E]/2 99.2.19, 5:21 PM21