Filter
Top Products
11
English
Selecting the Display Color (ONLY FOR FS-J60)
You can select the display color (COLOR 1 – COLOR 5 and
AUTO mode).
• AUTO mode changes the color (COLOR 1 to COLOR 5)
gradually.
To select the color, press COLOR.
• Each time you press the button, the color
changes as follows:
COLOR
AUTO COLOR 1 COLOR 2
COLOR 4 COLOR 3COLOR 5
DIMMER
To enjoy the heavy sound (ONLY FOR FS-J60)
You can enjoy the heavy sound. The function boosts low and
high frequency sounds—Sound Turbo.
Press SOUND TURBO.
• Each time you press the button, the Sound
Turbo is turned on and off alternately. When it
is turned on, the BASS indicator lights up on
the display.
When the Sound Turbo is on, the bass and the treble levels
are set to +2 (see page 10). After the Sound Trubo is
canceled, these levels restored to the previous levels.
To reinforce the surround effect (ONLY FOR FS-J60)
You can reinforce the surround effect.
• This function does not affect your recording and playback
sound of monaural sources.
To get the effect, press SURROUND so that
the SURROUND indicator lights up on the
display.
To cancel the effect, press SURROUND again so that the
SURROUND indicator goes off.
Selecting the Illumination Brightness
You can change the illumination and display brightness only
while the unit is turned on.
On the remote control ONLY:
To change the brightness, press DIMMER.
• Each time you press the button, the illumination
and display dim (DIM ON) and brighten (DIM
OFF) alternately.
SOUND
TURBO
SURROUND
BASS
EN01-13_FS-J60&50[C]f.pm6 03.1.23, 7:44 PM11