JVC CA-FSH300 Stereo System User Manual


 
21
English
Using Sleep Timer
With Sleep Timer, you can fall asleep to your favorite music
or radio program.
You can set Sleep Timer only when the unit is turned on.
You can also turn off the unit automatically by using Auto
Standby. (See page 8.)
How the Sleep Timer actually works
The unit automatically turns off after the specified length of
time passes.
On the remote control ONLY:
1
Press SLEEP.
The SLEEP indicator starts flashing on the
display.
Each time you press the button, the length of time
changes as follows:
2
Wait for about 5 seconds after specifying the
length of time.
The SLEEP indicator remains lit on the display.
To check the remaining time until shut-off time, press
SLEEP once. The remaining time until shut-off time appears
for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the length of time you want appears.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off and display returns to the normal
indication.
Turning off the unit also cancels the Sleep Timer.
(canceled)
10 20
120
30 60
90
OFF
SLEEP
SLEEP
When you set the Sleep Timer after the Daily Timer
starts playing the selected source
The unit turns off with either timer having an earlier shut-off time.
If you set the Sleep Timer while playing back or
recording a tape
Do not shut the unit off with the Sleep Timer while a tape is running.
If the unit turns off while playing back or recording a tape, the
cassette deck or tapes may be damaged.
19-21_FS-H350&H300[C]2.p65 04.3.18, 10:37 AM21