Filter
Top Products
26
Advanced operations
1 Press ZOOM during playback or
while paused.
• Each time you press the button, the picture
magnification will be changed (M1.5 only
for a VCD and SVCD).
2 Select the portion you want to
see by using cursor 5 // /2 /3.
• This operation cannot be carried out when
the magnification is
M1.
• To resume normal playback, select M1 in
Step 1.
1 Press VFP during playback or
while paused.
“VFP SET” will appear on the display window
on the main unit and the current setting will be
displayed on the TV screen.
• Gamma: Controls brightness of neutral tints
while maintaining brightness of dark and
bright portions.
• Sharpness: Controls screen sharpness.
2 Press cursor2 /3 to select VFP
mode.
• It is recommended to select “NORMAL”
usually, or “CINEMA” in a dark room. When
either “NORMAL” or “CINEMA” is selected,
go to Step 7.
• When either “USER 1” or “USER 2” is
selected, the adjustment can be carried out
in detail in the operations after Step 3.
3 Press cursor5 // to select an
item to be adjusted.
4 Press ENTER.
5 Press cursor5 // to change the
value.
6 Press ENTER.
To adjust other items, go back to Step 3.
7 Press VFP.
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• “VFP” is an abbreviation of “Video Fine Processor”.
Enlarging the picture
(ZOOM)
Adjusting the picture
quality (VFP)
(only for moving image)
GAMMA
TV screen
Example:
EXA1[UJ].book Page 26 Monday, January 19, 2004 1:54 PM