JVC CA-MXKB1 Stereo System User Manual


 
24
Using the Timers
Setting the SLEEP Timer
Use the Sleep Timer to turn the System off after a certain number
of minutes when it is playing. By setting the Sleep Timer, you can
fall asleep to music and know that your System will turn off by it-
self rather than play all night.
You can only set the Sleep Timer when the System is on.
Using the Remote Control
1
During playback a source, press the SLEEP
button.
The “SLEEP” indicator starts blinking on the display.
2
Set the length of time you want the source to
play before shutting off.
Each time you press the SLEEP button, the time length chang-
es as follows:
10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the
beginning)
3
Wait for 5 seconds.
The “SLEEP” indicator stops blinking and remains lit, and the
display returns to the original one before setting the Sleep
Timer.
The System is now set to turn off after the number of minutes
you have set.
To Confirm the Sleep Time:
When the SLEEP button on the Remote Control is pressed, the re-
maining sleep time is displayed. Wait until the display returns to
the original display.
To Cancel the SLEEP Timer Setting:
Press the SLEEP button on the Remote Control until the “SLEEP”
indicator goes out on the display.
Turning off the System also cancels the SLEEP Timer.
Timer Priority
Since REC Timer and DAILY Timer can be set independently, you
may wonder what happens if the settings overlap. Here are the pri-
orities for REC Timer and DAILY Timer:
Timer with the earlier time setting will have the priority.
Timer will not operate when other Timer is operating.
If other Timer is set to an exact same time as the REC Timer,
the REC Timer will have the priority.
REC Timer and DAILY Timer will not operate when SLEEP
Timer is operating.
Example
21:30 23:0022:3022:00
21:30 22:30
REC Timer
DAILY Timer
Setting
ON
OFF
OFF
ON OFF
Operation
REC Timer
DAILY Timer
Operates only in REC Timer mode.
ON
MX-KB2[B].book Page 24 Wednesday, April 28, 2004 2:16 PM