Filter
Top Products
19
EnglishEnglishEnglishEnglishEnglishEnglishEnglish
LVT0686-009B / CA-K1R/CA-K3R(B) / English
Using the Cassette Deck (Listening to a Tape)
The Cassette Deck allows you to play, record, and dub audio tapes.
❏ Listening to type I, II tape is suitable for this Cassette Deck.
The use of tapes longer than 120 minutes is not rec-
ommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers
and the capstans.
One Touch Play
By pressing the TAPE 3 button, the System will come on, and if
a tape is in the deck, it will start to play. If no tape is loaded, “NO
TAPE” appears on the display, the System will come on and wait
for you to insert a tape, or select another function.
Playing a Tape
You can use either Deck A or Deck B at a time for playback.
1
Press the
0
EJECT part for the deck you
want to use.
2
When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
down, toward the base of the Unit.
The tape will travel from the left to right.
• If the cassette holder does not open, turn the System off,
then back on and press the 0 EJECT part again.
3
Close the cassette holder gently.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
The selected Deck is shown by the Deck indicator “A” or “B”.
For example, when the Deck A is selected, the Deck indicator
“A” lights up.
• To change the deck, press the TAPE A/B button. Each time
you press the button, Deck A or Deck B is alternately
selected.
4
Press the TAPE
3
button.
The Tape indicator (3) blinks on the display and the tape is
played back.
The Cassette Deck automatically stops when one side of the
tape has finished playing.
To stop playing
, press the 7 button.
To remove the tape
, stop the tape, and press the 0 EJECT part
to open the Cassette Holder.
To Fast-Wind A Tape
During playback or in Stop mode, press the ¡ (FF) button on the
Unit to fast-wind the tape onto the right side of the cassette without
playing.
During playback or in Stop mode, press the 22 (REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing.
During fast-winding the tape, the Tape indicator (3) goes out.
• The Cassette Deck automatically stops when one side of the
tape has finished playing.
❏ During fast-winding the tape, you can change the tape travelling
direction by pressing the ¡ (FF) or 22 (REW) button.
REMOTE CONTROL
1 2 3
4 5 6
7 8 9
10 +10
FM MODE
FM /AM
AUX
SLEEP
STANDBY/ON
CD
1
CD
2
CD
3
CD
SOUND
MODE
ACTIVE
BASS EX.
FADE
MUTING
VOLUME
1
1
PROGRAM
/RANDOM
REPEAT TAPE A/B
TAPE
1
DISPLAY
MODE
1 1 SELECT
1
PTY/EON
TAPE A/B
ACTIVE
BASS EX.
COMPACT COMPONENT SYSTEM
STANDBY
PHONES
REPEAT PROGRAM RANDOM
/STOP REC STARTDUBBING
REC START
CD
CLOCK
/TIMER
TAPE
A/B
DISC SKIP
EJECT
PLAY
A
REC/PLAY
B
CD CONTROL
CD
1
AUX
FM/AM
CD
TAPE
CD
2
CD
3
SOUND
MODE
CD-R/RW PLAYBACK
SELECT
PTY
/
EON
DISPLAY
MODE
CANCEL SET
PRESET
TUNING
/ DEMO
FULL - LOGIC CONTROL CD SYNCHRO RECORDING
EJECT
R
O
C
K
C
L
A
S
S
I
C
P
O
P
V
O
L
U
M
E
3-CD
PLAY & EXCHANGE
STANDBY/ON
DUAL D/A
1 BIT
CONVERTER
¡
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
B
A
22
4
TAPE
3
¢
7
7
TAPE A/B
TAPE
3
Deck indicators
3
: Tape indicator
0
EJECT
(Deck B)
0
EJECT
(Deck A)
Tape travelling direction
MX-K1R&MX-K3R(B).book Page 19 Friday, March 23, 2001 9:49 AM