JVC CA-MXGT80 Stereo System User Manual


 
– 13 –
English
Playing Back CDs (CD/CD-R/CD-RW)
This unit has been designed to playback the following CDs:
CD (Audio CD)
CD-R (CD-Recordable)
CD-RW (CD-ReWritable)
Continued use of irregular shape CDs
(heart-shape, octagonal, etc.) can damage
the System.
General Notes
In general, you will have the best performance by keeping
your CDs and the mechanism clean.
Store CDs in their cases, and keep them in cabinets or on
shelves.
Keep the system’s disc trays closed when not in use.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
“finalized.”
You can play back your original CD-Rs or CD-RWs
recorded in music CD format. (However, they may not be
played back depending on their characteristics or recording
conditions.)
Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or the player’s lens is dirty.
CD-RWs may require a longer readout time. This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.
CORRECT
INCORRECT
Loading CDs
On the unit ONLY:
1
Press 0 for the disc tray
(CD1, CD2, and CD3) you
want to load a CD onto.
The unit automatically turns on and
the disc tray comes out.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press the same 0 you have
pressed in step 1.
The disc tray closes, and the
corresponding disc number lamp and
disc indicator light up on the display
(CD1, CD2, and CD3).
4
Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
When you press 0 for the next tray you want to place another CD
onto, the first disc tray automatically closes and then the next tray
comes out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
The disc marker lights up for the disc number you have selected.
The disc indicator flashes while the corresponding CD is being
played.
The disc indicators goes off when the unit has detected that there
is no CD on the corresponding disc tray.
Disc number
Disc indicator
Disc marker
EN13-17.CA-MXGT90&80&70[UJ,UW]f 3/21/01, 6:25 PM13