Filter
Top Products
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
W3v2 VOICE COILS IN SERIES: W3v2 VOICE COILS IN PARALLEL:
W3v2-D6: 12.0Ω
W3v2-D4: 8.0Ω
W3v2-D2: 4.0Ω
W3v2-D6: 6.0Ω
W3v2-D4: 4.0Ω
W3v2-D2: 2.0Ω
W3v2-D6: 4.0Ω
W3v2-D4: 2.7Ω
W3v2-D2: 1.3Ω
W3v2-D6: 3.0Ω
W3v2-D4: 2.0Ω
W3v2-D2: 1.0Ω
W3v2-D6: 1.5Ω
W3v2-D4: 1.0Ω
W3v2-D2: 0.5Ω
W3v2-D6: 1.0Ω
W3v2-D4: 0.7Ω
W3v2-D2: 0.3Ω
2 JL AUDIO 10W3v2
*Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. **Efficiency (1W/1m) is not an accurate indicator
of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. ***Re (DC resistance) is
measured with the voice coils in series,for parallel-wired specification divide Re by 4. All other specifications remain the same.
SUBWOOFER SPECIFICATIONS
WIRING OPTIONS
SUBWOOFER: 10W3v2-D2 10W3v2-D4 10W3v2-D6
Free Air Resonance (Fs): 28.1 Hz 28.4 Hz 29.3 Hz
Electrical “Q” (Qes): 0.474 0.527 0.547
Mechanical “Q” (Qms): 9.50 9.50 9.50
Total Speaker “Q” (Qts): 0.452 0.499 0.517
Equiv. Compliance (Vas): 1.71 ft
3
1.71 ft
3
1.71 ft
3
48.4 litres 48.4 litres 48.4 litres
One-way,Linear Excursion: 0.549 in 0.579 in 0.513 in
(Xmax)* 13.9 mm 14.7 mm 13.0 mm
Efficiency (1W/1m)**: 85.4 dB 85.2 dB 85.5 dB
Effective Piston Area (Sd): 53.5 in
2
53.5 in
2
53.5 in
2
0.0345 m
2
0.0345 m
2
0.0345 m
2
DC Resistance (Re)***: 3.31Ω 6.94Ω 10.96Ω
Nominal Impedance: Dual 2Ω Dual 4Ω Dual 6Ω
Power Handling (continuous): 300W 300W 300W
Mounting Depth: 5.75 in 5.75 in 5.75 in
146 mm 146 mm 146 mm
Mounting Hole Diameter: 9.125 in 9.125 in 9.125 in
232 mm 232 mm 232 mm
Driver Displacement: 0.05 ft
3
0.05 ft
3
0.05 ft
3
1.42 litres 1.42 litres 1.42 litres