Jensen Tools XA250 Stereo Amplifier User Manual


 
6
XA2125, XA275, XA250
®
Inputs, RCA Output, Remote Level Control
Input Wiring
Low Level Input (RCA Input)
Low level (RCA) input is preferred for best
performance. Most trunk/hatchback installations
will require a 15-20 foot RCA cable. While pick-
up trucks and under-seat mounting will require
a 6-10 foot RCA cable.
Connect an RCA cable
from your receiver to the RCA input on your
amplifier.
High Level Input
High level input should be used when an RCA
output is not available from the receiver.
Connect the speaker outputs from the receiver
to the high level input connector.
Connecting other Amps
RCA Output
The output signal allows you to
conveniently connect other
amplifiers to each other.
Important
Only connect the low (RCA) or high level input.
Do not use both at the same time.
Radio
L
R
Splice
(as necessary)
Hi Level
or
LR
++
Low Level
HI LEVEL
INPUT
LR
REMOTE
BASS
HI LEVEL
INPUT
LR
REMOTE
BASS
OUTPUT
LR
OUTPUT
HI INPUT
L
R
LOW INPUT
L
R
XA2125
XA275
XA250
White = Left (+)
White/Black = Left ()
Gray = Right (+)
Gray/Black = Right ()
Black (ground)
OUTPUT
LR
6236 XA2CH_E.p65 5/7/01, 2:07 PM6